Can You Provide an Exact Estimate Before the Work Begins?

Absolutely. At Neighborhood Electric Inc., we provide a detailed, upfront estimate before any work starts. One of our electricians will evaluate your electrical needs on-site, explain the recommended solution, and answer any questions you may have. Our pricing is honest and transparent, so you can expect no hidden charges or surprise costs.

Are GFCI Outlets Really Necessary?

Yes. Ground Fault Circuit Interrupter (GFCI) outlets are an important safety feature designed to reduce the risk of electrical shock. They automatically cut power if they detect an electrical fault, helping protect people in areas where water and electricity are likely to meet. GFCI outlets are required in locations such as kitchens, bathrooms, garages, laundry rooms, and outdoor spaces.

Is Whole-Home Surge Protection a Good Investment?

For most homeowners, whole-home surge protection is a smart addition to their electrical system. It helps safeguard valuable electronics and appliances from unexpected voltage spikes caused by lightning, utility issues, or internal electrical problems. Benefits include: Protecting expensive electronics and appliances from surge damage Reducing the risk of electrical fires caused by power surges Providing continuous protection for your home's electrical system Helping meet insurance or utility provider recommendations in some cases

Is Aluminum Wiring Dangerous?

Aluminum wiring isn't always unsafe, but it does require careful attention. As it ages, aluminum wiring can oxidize and loosen at connection points, increasing the risk of overheating and electrical fires. If your home contains aluminum wiring, it's wise to schedule an inspection with Neighborhood Electric Inc.. We can assess its condition and recommend repairs or upgrades if needed.

Should I Replace Knob-and-Tube Wiring?

If your home still relies on knob-and-tube wiring, replacing it is generally recommended. This older wiring system was installed more than a century ago and wasn't designed to support today's electrical demands. It also lacks grounding, which is an important safety feature in modern electrical systems. Upgrading your wiring can improve safety, reliability, and code compliance.

Can I Handle Electrical Repairs on My Own?

While replacing a light switch or outlet cover may seem straightforward, many electrical repairs require specialized knowledge and should be left to licensed professionals. Mistakes can lead to electrical shock, fire hazards, costly damage, or code violations. Hiring Neighborhood Electric Inc. ensures the work is completed safely, correctly, and in accordance with current electrical codes.

Why Do My Light Bulbs Burn Out So Quickly?

Frequent light bulb failures can have several causes. While bulbs naturally wear out over time, repeated burnouts may indicate issues such as loose wiring, voltage fluctuations, poor-quality bulbs, or incompatible fixtures. Switching to LED bulbs can improve lifespan, but if the problem continues, Neighborhood Electric Inc. can inspect your electrical system to identify and resolve the underlying issue.

Switches & Outlets

Installation & Repair Services Since 2006

Electrician installing a light switch beside a wall outlet with a power drill in a home interior

Are you looking for a skilled electrician to install or repair switches or outlets in your home or office? If you have switches or outlets that are not functioning or not working properly, call the experts at Neighborhood Electric Inc.. When switches and outlets malfunction, your building is at risk for dangers such as electrical shock or fires. Whether you need to add new outlets or repair existing ones, we can help.

10% OFF

New Customer Special

Expires 08/31/2026

Call for a FREE Quote

(631) 319-7319

❝Amazing service!!❞

★★★★★ - "This guy is awesome! I called late in the evening when I discovered an issue with my dads outlets. I was expecting to leave a message when he actually picked up!!! I explained my situation and he is coming the next day! Amazing service!!"

Christina P.

Switch & Outlet Repair Work

Are your electrical outlets or switches not working? If so, call Neighborhood Electric Inc. for a quick appointment to fix them. Defective outlets can give you an electric shock or worse, cause a fire. One telltale signal that your outlet is defective is when it is no longer able to hold the plug. Another obvious indication that your outlet needs repair is if it sparks when you are plugging or unplugging something. Switches that either don't power your item or that don't hold their position are also of concern. Switches and outlets get used daily and are bound to suffer from frequent usage. Electrical work should always be handled by licensed professionals like Neighborhood Electric Inc..

Electrical Outlet and Switch Installation

Neighborhood Electric Inc. service provisions for electrical switch and outlet services don’t stop at just repairs, we also can handle your installation projects. Whether you need to add switches or outlets where they didn’t exist before or want to replace older existing ones, Neighborhood Electric Inc. has you covered. Don't put yourself at risk of electric shock by trying to install outlets or switches yourself. Call (631) 319-7319 to schedule electrical outlet and switch installation services.

How to Fix an Electrical Outlet

Electrical outlets, also known as receptacles, are a crucial component of any home or office's electrical system. They provide a convenient way to plug in devices and appliances, and they are relatively easy to install or replace. However, if an outlet is not working properly, it can be a major inconvenience and even a safety hazard. In this article, we will discuss the steps you can take to fix an electrical outlet and get it working again.

First, determine if the outlet is the problem or if it is a problem with the device or appliance you are trying to plug in. Try plugging the device or appliance into a different outlet to see if it works. If it does, then the outlet is likely the problem.

Next, check the circuit breaker or fuse to ensure that the outlet has power. If the circuit breaker or fuse has tripped or blown, you will need to reset or replace it before proceeding.

If the outlet is the problem and has power, then you will need to check the wiring. Make sure that the wires are securely connected to the outlet and that there are no frayed or damaged wires. If the wires are loose or damaged, they will need to be replaced.

If the outlet itself is damaged or worn out, you will need to replace it. To do this, you will need to turn off the power to the outlet by either unplugging the device or appliance or turning off the circuit breaker or fuse. Then, remove the old outlet by loosening the screws holding it in place and carefully pulling it out.

Next, attach the new outlet by connecting the wires to the appropriate terminals and securing it in place with the screws. Finally, turn the power back on and test the outlet to make sure it is working properly.

In conclusion, fixing an electrical outlet is a relatively simple task that can be done by anyone with basic electrical knowledge and a few basic tools. However, if you are unsure of your ability to safely complete the task, it is best to call a professional electrician. By following these steps and taking the necessary precautions, you can quickly and easily fix an electrical outlet and get it working again.

Choose Neighborhood Electric Inc. for Electrical Switch & Outlet Services

Neighborhood Electric Inc. has been improving area homes and businesses with electrical switch and outlet services since 2006. Working with electricity is risky and is best left to professional electricians. Improper handling of electricity can electrical shocks, damaged appliances, or worse, start a fire. Whether you are looking to install new outlets and switches or repair existing ones, Neighborhood Electric Inc. can help. Call us today to learn more about our electrical switch and outlet services.

Frequently Asked Questions

▼ Can You Provide an Exact Estimate Before the Work Begins?

Absolutely. At Neighborhood Electric Inc., we provide a detailed, upfront estimate before any work starts. One of our electricians will evaluate your electrical needs on-site, explain the recommended solution, and answer any questions you may have. Our pricing is honest and transparent, so you can expect no hidden charges or surprise costs.
▼ Are GFCI Outlets Really Necessary?

Yes. Ground Fault Circuit Interrupter (GFCI) outlets are an important safety feature designed to reduce the risk of electrical shock. They automatically cut power if they detect an electrical fault, helping protect people in areas where water and electricity are likely to meet. GFCI outlets are required in locations such as kitchens, bathrooms, garages, laundry rooms, and outdoor spaces.
▼ Is Whole-Home Surge Protection a Good Investment?
For most homeowners, whole-home surge protection is a smart addition to their electrical system. It helps safeguard valuable electronics and appliances from unexpected voltage spikes caused by lightning, utility issues, or internal electrical problems. Benefits include:
- Protecting expensive electronics and appliances from surge damage
- Reducing the risk of electrical fires caused by power surges
- Providing continuous protection for your home's electrical system
- Helping meet insurance or utility provider recommendations in some cases
▼ Is Aluminum Wiring Dangerous?

Aluminum wiring isn't always unsafe, but it does require careful attention. As it ages, aluminum wiring can oxidize and loosen at connection points, increasing the risk of overheating and electrical fires. If your home contains aluminum wiring, it's wise to schedule an inspection with Neighborhood Electric Inc.. We can assess its condition and recommend repairs or upgrades if needed.
▼ Should I Replace Knob-and-Tube Wiring?

If your home still relies on knob-and-tube wiring, replacing it is generally recommended. This older wiring system was installed more than a century ago and wasn't designed to support today's electrical demands. It also lacks grounding, which is an important safety feature in modern electrical systems. Upgrading your wiring can improve safety, reliability, and code compliance.
▼ Can I Handle Electrical Repairs on My Own?

While replacing a light switch or outlet cover may seem straightforward, many electrical repairs require specialized knowledge and should be left to licensed professionals. Mistakes can lead to electrical shock, fire hazards, costly damage, or code violations. Hiring Neighborhood Electric Inc. ensures the work is completed safely, correctly, and in accordance with current electrical codes.
▼ Why Do My Light Bulbs Burn Out So Quickly?

Frequent light bulb failures can have several causes. While bulbs naturally wear out over time, repeated burnouts may indicate issues such as loose wiring, voltage fluctuations, poor-quality bulbs, or incompatible fixtures. Switching to LED bulbs can improve lifespan, but if the problem continues, Neighborhood Electric Inc. can inspect your electrical system to identify and resolve the underlying issue.

Call for Fast FREE Quote

(631) 319-7319

A+ rating with Better Business Bureau!

Get a Price